-
Watch Demo Video Get a grip on your wire and cable identification – Brady and Velcro Companies have partnered to bring you BradyGrip® Print-on Hook Material, an exclusive print-and-place material that can be easily applied, repositioned or removed. Attaches perfectly to WrapStrap for all your installation and labeling needs. Available in 1/4", 1/2", and 3/4" Width. Each cartridge contains 10 feet of Print-on Hook Material. -
Watch Demo Video Meeting the requirements of these regulations allows these products to be used for wire and cable management above a hung ceiling or below a raised floor. Manufactured from Polypropylene and Nylon. UL (Underwriters Laboratories) 94-V2 FAR 2.5 853 A/B NEC Section 300-22 (C) & (D). Tested for a minimum of 50 release cycles.
15ft rolls are available on the site. To purchase 75ft and 600ft rolls, please contact our authorized distributors through our map or list. -
Watch Demo Video Our heavy duty 4.5 inch locking carabiner secures tightly with a screw closure for added security. Attach it to a belt for hands-free carrying or use it as a hangar during cable runs.
-
Sale!
RipWrap offers all the holding power of gaffer’s tape, but with none of the gummy residue. It is the preferred choice of professional installers. This sale item is available in a 1" x 75 ft continuous roll. Once it’s sold out, it will not be restocked. All clearance items are final sale and cannot be returned. -
Watch Demo Video Black Flat Bottom Carabiner has a wider opening for a large variety of uses. CableCarrier strap. Choose your length below. Release with one hand. Durable and tested up to 10,000 release cycles.
-
Watch Demo Video Black Triangle Carabiner is good for single point attachment such as hanging from a hook. CableCarrier strap. Choose your length below. Release with one hand. 10,000 Release Cycles.
-
Watch Demo Video Silver Flat Bottom Carabiner has a wider opening for a large variety of uses. Comes with a 1" wide CableCarrier strap. Choose your length below. Release with one hand. Durable and tested up to 10,000 release cycles.
-
Watch Demo Video Silver Triangle Carabiner is good for single point attachment such as hanging from a hook. CableCarrier strap. Choose your length below. Release with one hand. Durable and tested up to 10,000 release cycles.
-
Watch Demo Video The CableCarrier is a sturdy woven strap attached to a lightweight metal carabiner with a spring-release mechanism. Easily hold wires, cords or ropes in place. Attach it to a belt for hands-free carrying or use it as a hanger during cable runs.
-
Watch Demo Video Acrylic pressure sensitive adhesive securely attaches CableCatch to equipment racks, desks or walls. One quick pull of the tab releases the cable for quick equipment set-ups.
-
Watch Demo Video The CableHanger is perfect for organizing cable runs, it adheres to trusses, shelves, desk legs or other vertical posts. Great when you need to add, subtract or replace cables or wires in sub-flooring, false fronts and other hidden areas.
-
Watch Demo Video We use the highest quality hook and loop and double stitch, never glue or heat weld - to insure the CinchStrap will stand up to years of daily use. The non-magnetic buckles are safe for use around electrical or magnetic materials.
-
Watch Demo Video Professional grade quality, durability and value for cable management. • Perfect for managing cable bundles in mobile carts, along walls, over doorways, and in wiring closets. • Attach to any rack or surface. Use any fastener up to 1/4" diameter for mounting. • Non-magnetic brass grommet spreads fastener load evenly without risk of ripping the strap. These heavy-duty utility straps offer extra strength and holding power. CinchStraps act like a pulley system and have countless applications, whether in industrial settings, at home, in the garden, or for activities like boating. Made with the highest quality hook and loop, these products exemplify our exacting standards.
-
Watch Demo Video- 2” CinchStrap-EG has two brass spur grommets to support heavier cable runs.
- Grommets are spaced 7/8” on center.
- 1-1/8” on center to match standard rack hole dimensions available by special request.
- Heavy duty nylon webbing adds additional strength.
-
Watch Demo Video We use the highest quality hook and loop and double stitch, never glue or heat weld - to insure the CinchStrap will stand up to years of daily use. The non-magnetic buckles are safe for use around electrical or magnetic materials. Same great design as the One Inch Wide CinchStrap with the additional strength of heavy duty nylon webbing.
-
Watch Demo Video The EconoCatch organizes cables against any smooth surface. The rubber-based adhesive back allows for attachment to desks, walls, computers and other kinds of equipment.
-
Watch Demo Video Available in a variety of widths and lengths, the EconoWrap is great for controlling cables and cords. The gentle-hold hook and loop is simple and easy to use, while the die-cut rounded edge makes quick release a snap. 2,000 Release Cycles for economy minded budget.
-
Watch Demo Video Our original patented tie, one end semi-permanently attaches to a cable, the other end has a pull-tab to fasten and unfasten the Rip-Tie with one hand. Durable and tested up to 10,000 release cycles.
-
Watch Demo Video CableWrap gets personal with Write-On Labels. Add your name, or use the label to mark cable length or function. CableWrap won't get lost, it permanently attaches to cable, and is reusable over 10,000 times.
-
Watch Demo Video Our uniquely designed Pivoting Tie Attachment allows you to accommodate any angle of cable run. Keeps cables on the same plane and fixed in the same direction. Rotates 360 degrees on one plane.
-
Watch Demo Video Our most popular product in cable management has been enhanced with new patented technology. One end of the Rip-Lock CableWrap semi-permanently attaches to the cable, the other end has a pull-tab for one-handed quick release. Durable and tested up to 10,000 release cycles.
-
Watch Demo Video Our most popular product in cable management has been enhanced with new patented technology. One end of the Rip-Lock CableWrap semi-permanently attaches to the cable, the other end has a pull-tab for one-handed quick release. Easy write-on labels helps you keep all your cables in order. Durable and tested up to 10,000 release cycles.
-
Watch Demo Video The New Patented Rip-Lock Collar locks Rip-Tie Wrapstrap and many "loop" fabrics onto a cable hose or pipe. Use to organize cables, hang pictures, etc. Will not get loose or lost. Enclosed key is required to remove the Rip-Lock Collar.
2 packs and 10 packs are available on this site. To purchase in 20 packs and packs of 100, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite is ideal for bundling and organizing computer and network cables. A diecut slot allows for attachment to a single cable. Tested for up to 200 release cycles. Tested for a minimum of 200 release cycles.
5 packs are available on this site. To purchase the 10 Pack, 1 Roll of 10, 1 Roll of 25, 10 Rolls of 10, 375 piece roll, please contact our authorized distributors through our map or list. -
Watch Demo Video Professional grade quality, durability and value for cable management. • Perfect for managing all your tape rolls. • Carabiner allows to be hung for maximum convenience. • Hang it from a cart or rock for transporting equipment, or on stationary hooks or truss for easy access where you need. • Non-magnetic brass grommet spreads fastener load evenly without risk of ripping the strap. These high quality straps are tested for 10,000 release cycles. The 1" Tape Holder is available in a variety of sizes to help with any and all tapes in your collection. Made with the highest quality hook and loop, these products exemplify our exacting standards.
-
Get longer battery life and save money on AA batteries with this M210 Rechargeable Li-Ion Battery Pack.
- Package includes spare printer battery (label printer and charger sold separately)
- Long battery life; prints at least 2,000 2 in. (50.8 mm) long labels per charge (battery charges outside of printer using AC adaptor)
- Use AC adapter/charger to charge battery (not included)
- Enables cordless printer operation to print labels where (and when) you need them
-
Watch Demo Video RipWrap offers all the holding power of gaffer's tape, but with none of the gummy residue. Wrap up plants for easy transport or keep your pants from flapping in the wind when cycling. The possibilities are endless! Comes in continuous or perforated every 3, 6, 9 and 12 inches to accommodate your needs. No wonder it's the preferred choice of professional installers.
-
Watch Demo Video The CableCarrier is a sturdy woven strap attached to a lightweight metal carabiner with a locking mechanism. Easily hold wires, cords or ropes in place. Attach it to a belt for hands-free carrying or use it as a hanger during cable runs. It comes with our 4.5" Carabiner.
-
Watch Demo Video The CableCarrier is a sturdy woven strap attached to a lightweight metal, 7" carabiner with a spring-release mechanism. Easily hold wires, cords or ropes in place. Attach it to a belt for hands-free carrying or use it as a hanger during cable runs.