-
Watch Demo Video The CableCarrier is a sturdy woven strap attached to a lightweight metal carabiner with a locking mechanism. Easily hold wires, cords or ropes in place. Attach it to a belt for hands-free carrying or use it as a hanger during cable runs. It comes with our 4.5" Carabiner. -
Watch Demo Video The CableCarrier is a sturdy woven strap attached to a lightweight metal carabiner attached to a heavy duty, locking carabiner. Easily hold wires, cords or ropes in place. Attach it to a belt for hands-free carrying or use it as a hanger during cable runs.
4 packs are available on this site. To purchase larger quantities, please contact our authorized distributors through our map or list. -
Watch Demo Video Keep your cables together and separated! Large, strong metal carabiner with latch holds sturdy woven straps to handle heavy weights. Used on trusses and scaffolding. Color code your cable bundles for easy inventory. Available in 10 standard colors. Release with one hand. Durable and tested up to 10,000 release cycles.
4 packs are available on this site. To purchase larger quantities, please contact our authorized distributors through our map or list. -
The OpticalWrap provides optimal management of heavy-duty cables with connectors. The extra protection around the connector helps to prevent deterioration of optical camera cables.
-
Same great design as the 1-1/2 Inch Wide OpticalWrap with the additional strength of heavy duty nylon webbing. The OpticalWrap provides optimal management of heavy-duty cables with connectors. The extra protection around the connector helps to prevent deterioration of optical camera cables.
-
Watch Demo Video Our original patented tie, one end semi-permanently attaches to a cable, the other end has a pull-tab to fasten and unfasten the Rip-Tie with one hand. Durable and tested up to 10,000 release cycles. -
Watch Demo Video Meeting the special fire-safety requirements of plenum spaces means these products can be used for wire and cable management above a hung ceiling or below a raised floor. Manufactured from Polypropylene and Nylon. Fire retardant version meets certification requirements for MVSS 302. Tested for a minimum of 50 release cycles.
5 packs are available on this site. To purchase the 10 pack, 1 roll of 10, 1 roll of 25, 10 rolls of 10, 400, 600, 900, 1200 and 1440 piece rolls, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite is ideal for bundling and organizing computer and network cables. A diecut slot allows for attachment to a single cable. Tested for a minimum of 200 release cycles.
5 and 10 packs or rolls of 10 and 25 are available on this site. To purchase 400, 600, 900, 1200 and 1440 piece rolls, please contact one of our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite Plus has the same durability as the Rip-Tie Lite, but at .03" thickness, it has a lower profile, and a lower cost. Tested for a minimum of 200 release cycles.
25 and 30 pieces rolls are available on this site. To purchase 1 roll of 180, 2 rolls of 25, 4 rolls of 25 or 1 roll of 75 pieces, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. Tested for up to 200 release cycles.
5 packs are available on this site. To purchase the 10 Pack, 1 Roll of 10, 1 Roll of 25, 10 Rolls of 10, 675 piece rolls, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. The grommet is added for heavy duty uses. Tested for up to 200 release cycles.
5 packs are available on this site. To purchase the 10, 25 and 100 packs, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite mini is ideal for bundling and organizing computer and network cables. Any small cable bundle can be controlled with the Rip-Tie Lite mini. Perfect for USB adapter cables or earbud cords. A diecut slot allows for attachment to a single cable Each package contains a quantity of ten 1/4 x 5-1/2″ wraps. Tested for a minimum of 200 release cycles.
10 packs are available on this site.
-
Watch Demo Video Any small cable bundle can be controlled with the Rip-Tie Mini. Perfect for USB adapter cables or earbud cords.Each package contains a quantity of seven 1/4 x 3-1/2" wraps. Available in bulk quantity packages of 56, 252, 1008 and 2016 bulk packs for commercial applications. Tested for up to 200 release cycles.
-
Watch Demo Video The EconoCatch organizes cables against any smooth surface. The rubber-based adhesive back allows for attachment to desks, walls, computers and other kinds of equipment. -
Watch Demo Video The EconoCinch can be used to bundle cables or hoses or to strap equipment to desks or carts. The loop lock acts as a pulley, giving you leverage to tighten the strap as needed. Another plus: The non-metallic buckle is safe to use around electrical and magnetic equipment. -
Watch Demo Video The EconoCinch-EG features a brass grommet with an ID of 1/4". It can be attached with a metal fastener to walls, carts, equipment racks or van interiors. Like the EconCinch, it features a non-metallic buckle. 2,000 Release Cycles. -
Watch Demo Video Available in a variety of widths and lengths, the EconoWrap is great for controlling cables and cords. The gentle-hold hook and loop is simple and easy to use, while the die-cut rounded edge makes quick release a snap. 2,000 Release Cycles for economy minded budget. -
Watch Demo Video An elastic loop securely fastens the EconoWrap to the cable. Can be easily uninstalled or moved. 2,000 Release Cycles. -
Watch Demo Video Available in a variety of widths and lengths, the EconoWrap is great for controlling cables and cords. The gentle-hold hook and loop is simple and easy to use, while the die-cut rounded edge makes quick release a snap. Semi-permanently attaches the EconoWrap to a cable with a nylon tie, so you won’t lose it. Tested for a minimum of 2,000 release cycles. -
Watch Demo Video Available in a variety of widths and lengths, the EconoWrap is great for controlling cables and cords. The gentle-hold hook and loop is simple and easy to use, while the die-cut rounded edge makes quick release a snap. Easily fasten the EconoWrap by peeling the hook strap away, then mounting the cable and re-attaching the hook strap. 2,000 Release Cycles. -
Watch Demo Video Our original patented tie, one end semi-permanently attaches to a cable, the other end has a pull-tab to fasten and unfasten the Rip-Tie with one hand. Durable and tested up to 10,000 release cycles. -
Watch Demo Video CableWrap gets personal with Write-On Labels. Add your name, or use the label to mark cable length or function. CableWrap won't get lost, it permanently attaches to cable, and is reusable over 10,000 times. -
Watch Demo Video Professional grade quality, durability and value for cable management. • Perfect for managing all your tape rolls. • Carabiner allows to be hung for maximum convenience. • Hang it from a cart or rock for transporting equipment, or on stationary hooks or truss for easy access where you need. • Non-magnetic brass grommet spreads fastener load evenly without risk of ripping the strap. These high quality straps are tested for 10,000 release cycles. The 3/4" Tape Holder is perfect for your small rolls, or when you need only a few rolls for on the go. Made with the highest quality hook and loop, these products exemplify our exacting standards.
-
Watch Demo Video Write On the quick pinch hook and loop label then simply pinch it onto the cable. Unprecented ease-of-use. Unlimited uses.
10 packs are available on this site. To purchase in 50 Packs, 100 Packs and rolls of 500, please contact our authorized distributors through our map or list. -
Quick, easy, and strong, VELCRO® Brand ONE-WRAP®Rolls are perfect for bundling a wide range of materials, cables and tools. Adjustable ONE-WRAP®rolls are strong, resuable and designed for heavy duty indoor and outdoor use. Great for computer, appliance, and electronics wire management and organization. Custom cut to length for handling any bundling job or big project. -
Watch Demo Video Acrylic pressure sensitive adhesive securely attaches CableCatch to equipment racks, desks or walls. One quick pull of the tab releases the cable for quick equipment set-ups. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. The grommet is added for heavy duty uses. Tested for a minimum of 50 release cycles.
5 packs are available on site. To purchase the 10 pack, 1 roll of 10, 1 roll of 25, 10 rolls of 10, 450 and 675 piece rolls, please contact our authorized distributors through our map or list. -
Watch Demo Video Our original patented tie, one end semi-permanently attaches to a cable, the other end has a pull-tab to fasten and unfasten the Rip-Tie with one hand. Durable and tested up to 10,000 release cycles. -
Watch Demo Video CableWrap gets personal with Write-On Labels. Add your name, or use the label to mark cable length or function. CableWrap won't get lost, it permanently attaches to cable, and is reusable over 10,000 times. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. Tested for a minimum of 200 release cycles.
5 packs are available on this site. To purchase the 10 pack, 1 Roll of 10, 1 Roll of 25, 10 Rolls of 10, or 450 piece rolls, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. Grommet for added strength to prevent tearing. Tested for a minimum of 200 release cycles.
5 packs are available on this site. To purchase 10, 25 and 100 packs, please contact our authorized distributors through our map or list. -
Watch Demo Video Unitag Cable Labels were designed to deal with the classic problem—how to easily distinguish one cable from another. Labels can be rotated 360 degrees for easy viewing (even in hard-to reach areas, like behind computer desks or in wiring closets). The labels are easy-to-install, interchangeable and reusable. Write directly on the surface with a marking pen, or add your own printed label.
10 packs are available on this site. To purchase in 50 packs, 100 packs and packs of 1000, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. Tested for a minimum of 200 release cycles.
5 packs and 10 rolls of 10 are available on this site. To purchase rolls of 10, 25 or spools of 230, please contact our authorized distributors through our map or list. -
Watch Demo Video Rip-Tie Lite Screw Mount version has a larger head and a perforated “X” for driving a screw. Grommet for added strength to prevent tearing. Tested for a minimum of 200 release cycles.
5 packs are available on this site. To purchase 10, 25 and 100 packs, please contact our authorized distributors through our map or list. -
This AC Adaptor allows you to power your M210 Label Printer without the need for recharging or replacing batteries.
- Package includes an AC adapter/charger (printer and battery pack sold separately)
- Power supply voltage: 110 V
- Power supply formatted for North America
-
RIP-TIE, a long established manufacturer of cable ties, and the popular anime "BOCCHI THE ROCK!", new collaboration item is now available! Professional grade product made from high quality VELCRO® Brand Hook and Loop fastener. © AKIHAMAZI/HOUBUNSHA, ANIPLEX